New neoprene timing Belts metric high load Optibelt Omega HL permit the conveyance of + 150% more power than the HTD timing Belts Omega RPP

Description

On drives with high torque and low belt speed, Optibelt OMEGA HL timing belts surpass the capacity of Optibelt OMEGA HP by up to 15%.

In addition, the design was optimised so that Optibelt OMEGA HL is much more suitable for drives with shock loading.

When used for new drive designs in these types of application, Optibelt OMEGA HL achieves the highest possible functional reliability in combination with an optimum efficiency.

Advantages
High power timing belt for extremely high loads over the total range of speeds
Suitable for high torques
Highest possible precision, exact synchronicity
Optimised absorption of shock loading
Quiet running due to optimised tooth shape
System cost savings due to a reduction of the drive volume
Maintenance-free
Temperature-resistant from 30 °C to +100 °C
Up to 2.5 times the power transmission capability of Optibelt OMEGA
Lower bearing load
Optimised wear behaviour

Pitch and length

Belts Code

t = Pitch

The code of the timing belt is composed of 3 parameters:

1. The Pitch ( distance between two teeth )
2. the length ( belt length mm)
3. The belt width in mm

Example code: Optibelt Omega HL 20-8MHL-560

Optibelt Omega HL = type of belt.

20 =  belt width is 20 mm

8MHL = The pitch is 8 mm

560 = Belt length 560 mm