|
|
|
| Polyurethane Timing Belts Optibelt Alpha |
 |
description  |
Polyurethane Timing Belts, Metric series
Optibelt Alpha
|
|
|
|
Description
|
|
The Optibelt ALPHA is extremely abrasion-resistant oil resistance is a standard feature as well as some resistance to acids and alkaline solutions. Low stretch steel tension cords with high reverse bending strength are used.
Advantages
• Timing and double timing belts
• Imperial and metric profiles
• Economic drive
• High level of resistance to teeth shearing
• Resistant to aggressive chemicals
• Can be used with pulleys to ISO 5296
|
| Standard belt widths and lengths |
 |
 |
|
Profile T2.5
t pitch = 2,5 (mm)
hs = 1.3 (mm)
ht = 0.7 (mm)
s = 1.5 (mm)
|
Profile T5
t pitch = 5 (mm)
hs = 2.2 (mm)
ht = 1.2 (mm)
s = 2.65 (mm)
|
Profile T10
t pitch = 10 (mm)
hs = 4.5 (mm)
ht = 2.5 (mm)
s = 5.3 (mm)
|
Profile AT5
t pitch = 5 (mm)
hs = 2.7 (mm)
ht = 1.2 (mm)
b = 2.5 (mm)
|
Profile AT10
t pitch = 10 (mm)
hs = 5 (mm)
ht = 2.5 (mm)
b = 5 (mm)
|
|
| Pitch e Length |
Belts Code
|
|
T2.5 - T5 - T10
AT5 - AT10
|
The code of the timing belt is composed of 3 parameters:
- The Pitch ( distance between two teeth )
- the length ( belt length mm)
- The belt width in mm
Example code:
Optibelt ALPHA Polyurethane Timing Belts, Metric T10-260-20
Optibelt ALPHA Polyurethane Timing Belts Metric = type of belt
T10 = The pitch is 10 mm
260 = Belt length 260 mm
20 = belt width is 20 mm
steel cords standard - Aramid cords on request
|
 |
Timing Belt Pulleys for Plain Bore |
Aluminium solid hub pulleys for timing belts metric
Pitch: T2.5 , T5, T10, AT5, AT10,
|
|
 |
Timing belts metric bars |
Aluminium bars toothed belt metric
Pitch: T2.5 , T5, T10, AT5, AT10,
|
|
 |
Lateral flanges for timing pulleys |
Lateral flanges for timing pulleys
Material: steel
|
|
 |
Locking plates for timing belts |
Locking plates for timing belts
Material: Aluminium
Pitch: T2,5, T5, T10, AT5, AT10,
|
|
|
